SVV90 OR SVB OR DV90

svv90, svb, dv90

So let us talk about the 6 way diverter valve that Nordvalves offers to its customers globally.

The SVV90 is a modern version of the Nimco-controls SVB version that has been used by many front loader OEM customers like trima and quicke but also John-deer and Stoll among many others.

This 1/2 valve model is very popular on many applications globally as a third function valve.

A solenoid directional control valve is very important to have as a third function valve on front end loaders mainly.

But it can be used on trucks and many other applications also.

It comes as either a 12 volt or 24 volt valve.

Meaning that the solenoid is either 12 or 24 volts.

Nordvalves used the most expensive European made solenoid to make sure that our customers gets the best possible , high quality solenoid to their 6 way diverter valve.

One of the great benefits of this valve model is that it has been on the market since 1995 from a Nord company.

And for this reason it has a long track record of being the valve customers go after, when they are in need of high quality mixed with a really good price and with good functionality.

So when ever you are in need of a high quality solenoid diverter valve, you should contact Nordvalves to assist you with your needs.

www.nordvalves.com

P80 VALVES.

So even if the P40 valve is more common on the market than the big brother version P80.

We should still not forget about the P80 version.

It is a very robust and good mono-block valve that comes in 1-6 sections and one section less than the P40 version that comes in 1-7 sections.

The main difference between these valves are that the P80 is a 1/2 model and that allows the valve compered to the P40 that is a 3/8 model to work at flows between 50-90 lpm.

It also has built in sectional valves at each spool as a standard feature, so this is very nice!.

But when looking at different spool and spool control options and even joystick options the P40 and P80 have pretty much the same available options for you as a customer.

Often when a customers starts using flows over 45-50lpm they switch from the Nordvalves P40 to the Nordvalves P80 version instead.

So the P80 model is really a bread and butter valve for a lot of machine builders globally.

A well functioning hydraulic valve that has a lot of great option when it comes the spools and spool controls to fit all kinds of global machine applications.

So if you have any needs for the valve model or any technical questions you are more than welcome to become a customer of Nordvalves hydraulic components your one stop shop since 1953 globally.

hydraulic monoblock valve 1/2 , 80lpm from nordvalves hydraulic components.
http://www.nordvalves.com

P40 WITH OR WITHOUT CHECK VALVE ON EACH SPOOL SECTION?.

So when opting for the safety check valve at each spool section what you are in laymen terms doing is that you are ,are hindering the so called back flow or also called reverse flow.

On the P40 valve you can order with or without the added check valve option.

For additional safety the check valve is always a good option, even if it really is not needed on most machine options that used the P40 model.

On bigger valves and flows over 50 lpm there is certainly a bigger need to have valves on with check valves on certain options.

If you have a let us say 89-95 lpm valve that does not offer the check valve options, you can still for instance on Palfinger or HIAB and Cargotech cranes use the over center valve option as added on safety to the system as a whole.

So this is one of the really nice features or the P40 model from Nordvalves hydraulic components that you can as a customer opt with or without check valves on each section.

So how does the order coding work with and without check valves on the P40 valve model.

So normally the valve comes without and if you want the standard model without check valve then you put a zero 0 in from of the model code.

So let us say that you order a standard valve two bank mono-block P40 version.

Then the code is 02P40 , if you opt for the check valve option then the code is 2P40, kind of simple dont you think.

We strive to keep our customers with simpler order codes rather than giving out strange model numbers that are only confusing the customers and end-users.

A lot of valve producers wants you to be forced to back to where you purchases the valve to be able to figure out exactly what kind of modification you have on the valve.

And this is of course a business decision that the producers have made to force you to remain loyal to one vendor in your local area.

So it is good to keep in mind that you can always opt for extra safety if needed when working on a P40 model from Nordvalves.

http://www.nordvalves.com

Thank you.

Best regards.

The Nordvalves hydraulic team.

07P40A1A1A1A1A1A1-ju+3

So a lot of you have asked about the 07P40 model with Joystick or Joysticks.

So usually you use two joysticks on a 7 bank mono-block valve like the 07P40 valve.

So usually you have the joysticks on section 1-2, and then on section 6-7.

So in between the joystick section you have 3-4 -5 SECTIONS with A1 and KZ1 lever option.

07P40A1A1A1A1A1A1A1
nordvalves 07P40A1A1A1A1A1A1A1-GKZ1 http://www.nordvalves.com

This valve option is fairly common on smaller Forrest machine applications where you want a simple but very trustworthy option when you are working in the woods!.

Joystick for P40 model.


http://www.nordvalves.com

So when you are in need of robust and well functioning hydraulic mono-block valves you that wont break your budget then you should opt for the Nordvalves 07P40 model with the ju+3 joystick option to make sure that you have reliable valve when working in the forest.

For questions on these models, please make sure to contact nordvalves hydraulic components for further information.

Thank you.
Best regards.
The Nordvalves team.

04P40 VALVE FOR SCREENERS AND OTHER MACHINES!

So one our most popular sizes of valves is our 04P40 valve both as 3/8 thread bsp and also as 1/2 thread bsp.

The 04P40 valve is often used for screeners and other machines that need a 4bank valve.

Usually they are used with double acting spool so the code is 04P40-A1A1A1A1-GKZ1-C2.

The C2 stands for HPCO which stands for high pressure carry over adapter.

And often these valves are used in line so then you need the C2 option as well!.

If you have any questions on the 04P40-A1A1A1A1-GKZ1-C2 valve, please dont hesitate to contact http://www.nordvalves.com

And we will help you out with your valve needs.

04P40-A1A1A1A1-GKZ1 from Nordvalves hydraulic components.

Thank you.

And Best regards.

Your Nordvalves hydraulic team.

1P40-A1-GKZ1

This valve version is a one of the most sold mono-block one bank valves in the world.

And it comes in 3 different threads.

One is the so called (normal) 3/8 thread.

One is the 1/2 thread that often is used in Ireland.

And one is the US thread knows as SAE thread.

To the 1P40 VALVE you have tremendous option for different spools and spool controls not to mention joysticks and pneumatic and hydraulic controls along the way.

There is everything from single acting spools for A-side and single acting spool for B-side, to Motor spool and float spool.

Spool controls are from position 1-2 to 1-2-3-4 to 1-2-3 and so on.

1P40 VALVE A1-GKZ1.

Welcome P40 valve customers.

P40 VALVE

We want to welcome you all, customers and partners who are invested in the P40 valve model.

Nordvalves hydraulic components is one of the 5 oldest hydraulic valve and hydraulic in general for OEM producers globally.

Many of you are familiar with our older companies like www.nordhydraulic or www.nimco-controls.com

So Nordhydraulic or Nimco, these are our oldest valve companies among a few others.

We started inventing and producing hydraulics in the year 1951 in Sweden and we have been producing hydraulics ever since then, in more than 20 different countries.

On this site we will discuss mainly the hydraulic valves that nordvalves produces and sells globally.

But we will also cover all of the other hydraulic valves that we produce which are closer to 30 different valve models.

They come in many shapes and sizes.

So dont be surprised when we teach you about the P40 and P80 valves among general hydraulics.

You are always welcome to contact us directly true www.nordvalves.com and we will answer any questions you might have about quotes or technical matters.

Well meet, we will be back soon!.

Thank you in advance.

Best regards.

The Nordvalves hydraulic components team http://www.nordvalves.com

P40 VALVE
07P40 valve model